- Track your orders
- Save your details for express checkout
Rocklok Segmental Concrete Straight Flat Block
Rocklok Segmental Concrete (Simlar to Firth Keystone Compac IV Block)
Rocklok Segmental Concrete
Specifications
| RockLok Flat: | 450mm L x 300mm W x 200mm H Coverage: 11.12 blocks per m2 Pallet: 40 blocks per pallet Setback: 0.9 degrees from Vertical (near vertical) Weight: 39.5 Kg |
| Rocklok Corner: | 400mm L x 225mm W x 200mm H Coverage: 12.5 blocks per m2 Pallet: 54 blocks per pallet Setback: N/A Weight: 38 Kg |
| Rocklok Cap: | 450mm L x 300mm W x 100mm H Coverage: 2.23 blocks per linear metre Pallet: 63 blocks per pallet Setback: 0 degrees from Vertical Weight: 27.5 Kg |
| Rocklok is ideal for:: | Tall retaining walls Terraced walls High seismic areas Steel ladder reinforced soil retaining structures Bridge abutments Wing walls Water applications Embankment stabilisation Soil anchor and rock anchor walls |
Description
The Rocklok® segmental concrete block retaining wall system has been proudly developed in New Zealand in conjunction with engineers to meet the demands found in this highly active seismic region.
Rocklok provides superior strength and performance, with a stronger pin-block connection and trench system, allowing a positive connection between the geogrid and steel reinforcement. This system also allows near vertical walls to be constructed and for high load environments.
This fully engineered system is ideal for bridge abutments, wing walls and large retaining walls. The positive connection system provides extra performance and safety when critical loads are present while still providing an aesthetically attractive finish.
The Rocklok system is designed to work in conjunction with the StrataGrid® high performance PET geogrids. Together Rocklok and StrataGrid products provide a positive connection using the unique locking trench and bar system. The Rocklok is also designed in conjunction with Cirtex® steel ladder systems for applications where inextensible reinforcement is required such as bridge abutment applications and similar.
Important information
- Please consult with your local council for site requirements and regulations before the construction of your wall. For retaining walls exceeding 900mm, or supporting additional loads, slopes, etc., engineering advice should be sought.
- • 100% New Zealand designed and manufactured
- • Fully engineered and tested
- • Versatile
- • Superior strength
- • Durable
- • Flexible
- • Clean, smart finish
- • Vertical
- • Environmentally safe
- • High seismic performance
- • Positive geogrid connection available
Rocklok® is a Registered Trademark of Allan Block Corporation registered in the United States.
StrataGrid® is a Registered Trademark of Glen Raven, Inc. registered in the United States.
